Today, we will create a digital copy of your Puzzle cube usign inventor software.
Think about the tools that you learned last class and write down all the steps you need in order to create your cube on the software.
You may start like this:
1. Draw my (red) puzzle piece, then extrude it.
2. ...etc.
Comment on this post. Make sure to include your name.
Adrian Garcia
ReplyDeleteMake a 2D sketch of the puzzle cube,
Extrude it,
Repeat these steps until I am finished.
First you draw a shape on a drid page,
ReplyDeletewherever you want it,then you extrude the shape and make it 3D.Then after you're done with that you choose a color or a design and then you are done.
-Aslin Cantu.
1. Create a new project.
ReplyDelete2. Select the rectangle tool.
3. Created a square that is 3x3.
4. Extrude it.
5. Add lines on all sides, so it can look like it's made of 27 different cubes.
-Stephen Copson
make a 2d sketch and then when your done extrude it and repeat this step until your done with your cube
ReplyDeletediego
Bryan:
ReplyDeletewell u have to make an object/shape then ur able to finsh sketch by extruding it and making it 2d
Ray Davalos
ReplyDeletefirst make the 2D shape you want to do. then after that you have to extrude the sides of the shape to make it look 3Dish. Remember you have to extrude all the sides of the square to make a cube. then you may change the material and the color
1.You first open the software.
ReplyDelete2.Draw a shape on the grid page.
3.Then you extrude the shape to make it 3D
4.Finally you choose the color you want it and your done.:D
create 2d sketch then extrude keep reapeating until shape is done
ReplyDeletejorge villela
VALERIA SANCHEZ
ReplyDelete1). Draw the red then extrude it
2). Then add another piece by drawing the pink piece
3). Then add another piece by drawing the blue piece
4). Then add another piece by drawing the orange
5). Then add another piece by drawing the green
Giovanni nino
ReplyDelete1) draw the red then extrude it
2)then add another piece by adding a different color for as many as they need.
Dania Martinez
ReplyDelete1.draw a cube on the grid
2.then you extrude the shape
3.then you choose the color for you cube
4 your done..!!=)
open the program
ReplyDeletego to new
then create a square and extrude it
keep doing it till u make them all
then just color them
y ya! :)
-arnold arguelles
First create the 2D sketch in the grid page then extrude so it looks like a cube (all sides are the same size) then add color or make it look like the same.
ReplyDeleteErick Trujillo
first draw out a 2D sketch of your shape then extrude it. Do this to all the shapes to make them look like how you sketched it out then you can color coat the shapes the color you want
ReplyDelete-Alex Hernandez
SAIRA VALLE
ReplyDeletewell the first thing you have to do is draw the cube in the grid. when finish extrudeing it make it 3D. finally you just have to add your favorite color.!!!!!!!!!!!!!!!!!!!!!!!
draw the red then exrude it
ReplyDeletethen add another piece(red)
then add another piece(blue)
then add another piece(orange)
then add another piece(green)
then add another piece(yellow)
emmanuel
ReplyDeletewhat i remember is that you need to the figure first then extracolite and to finish that figure and to press the option 2d figure and do the second figure and press finish
First im going to open a new file. Then im going to choose either line or rectangle/square. After that you save your picture, then you extrude it. You can also choose colors.
ReplyDeleteJessica Gonzalez
Azael Reyes
ReplyDelete1. Draw a square on the grid
2. Make the extrude so that the square can look in 3-D
3. Draw lines on all sides and make it look like a cube we have.
Carlos Garces
ReplyDeleteMake a 2D sketch of the puzzle cube in the computure program,
Extrude it,
Repeat these steps until I am finished
1)Draw the shape on a paper
ReplyDelete2)Make the square look like a 3d
3)Choose the colors that you want
karla garcia<3